Take advantage of our range of products in the PROMAN e-shop. Choose basic pallet and shelf racks. You can configure the cantilever rack according to the load/dimensions to your requirements. The system will automatically generate a quote for you. At the same time, you will find a wide range of accessories for pallet and shelf racks in the e-shop.
The end pins serve as a barrier preventing round profiles from rolling off the console. The pins are designed as removable. Only the lugs can be prepared for implementation and the pins themselves may be delivered later as required.
For operation with four-way trolleys, the cantilever racks can be equipped with guide profiles of different heights and designs. The height and profiles used are selected according to the needs of the trolley. The guide profile is anchored to the floor and can be fitted with tapering part to guide the trolley safely and easily into the service aisle.
For material with profiles, pallets and similar, cross beams can be added between the individual brackets for appropriate support of the stored material. The cross beams are dimensioned according to the weight and method of load placement.
For high variability in material storage, steel grates or chipboard can be installed between the brackets. This solution allows you to store everything from long bundles, to pallets or small piece material. To properly design the grate and its support, the future load must be specified in detail.
The storage surface of the brackets may be softened by gluing rubber with textile liner.
Cantilever racks are most frequently constructed with a load capacity of 50 to 2000 kg per individual cantilever console, their cantilever consoles range from 500 to 2000 mm, and the distance between columns is decided according to the length of the stored material and its weight. The column height is generally 2000 mm, according to the number of cantilever console.
The cantilever racking column with base is made from rolled steel section, specifically, IPE beams. The joint between the column and the supporting base is either bolted or welded. On the front side, the columns have openings for attaching the cantilever console; the console is adjustable at a height interval of 100 mm. The column section type varies according to the required load-bearing capacity, height, and number of cantilever console.
The standard cantilever racking finish is intended for use in interior environments – this is paint in the requested RAL color applied by wet spray. For exterior use, hot-dip galvanization is available.
Storage console is primarily made from IPE, or possibly TR4HR, rolled steel section. The cantilever console is fastened on to the racking column using a bolt fitted through a metal flange. At the end, they are equipped with a catch for an end pin to protect against rolling material.
PROMAN s.r.o. is one of the most distinguished suppliers of all types of racking systems on the market and is able to respond in a very flexible way to any and all of a client’s needs.