Mobile Shelving Racks

Mobile Shelving Racks

By placing the shelving racks on the mobile undercarriage you obtain highly funcional storing and archivate system which effectively uses all given space. The racks can be equipped by lateral sides, ceiling parts, shelf dividers, special shelves.

High weight-carrying capacity

Mechanical durability



Fast installation

  • Shelves can be fitted with full side walls, ceiling parts, partition walls, special rails for storing clothes, pull-out shelves, label holders, etc.

  • The storage shelves are adjustable in steps of 25 mm. Shelf load capacity up to 250 kg.

  • The surface finish is made by galvanizing or powder coating.

  • The driving mechanism consists of the chain transmission with a wheel.

  • The rails are anchored to the existing floor or embedded in concrete of the new floor.

  • Sliding doors and carriage locking can be mounted on the outer rack of the entire system to protect stored material from unauthorized access.

Pojízdné regály a archivační systémy

Atypical modifications

Mobile constructions

EU Compliant

Easy to operate

Variants of shelf racks



...allows effective increases in storage space capacity, while at the same time minimising costs.

Shelving racks - basic page

Shelving racks - basic page

In general, shelving unit construction is used for storing various types of goods and materials directly on shelves (smaller items, boxes, plastic containers, files, books, etc.)


Take advantage of our range of products in the PROMAN e-shop. For example, you can directly configure cantilever type shelves according to load/dimensions. The system will automatically generate a quote for you.  The e-shop also offers a large range of accessories for pallet and shelving racks.


Technical information

  • Shelving Unit Construction

    Shelving units are essentially designed to be self-supporting structures. The shelving units are prefabricated structures composed of special rolled steel section, support beams, and shelves; they are reinforced with diagonal bracing. The basic shelving design is one upright frame with shelving bays. The shelving unit frame is made from four uprights of the appropriate height that are interconnected by diagonal on depth from front to back. The shelving frame must always retain two shelves, i.e., two storage levels to ensure the stability of the overall construction. It is also possible to equip the shelving unit with any of the accessories provided.

  • Technical Details

    Shelving Unit Construction

    • Shelving Unit Construction
    • Shelving Unit Construction
    • Shelves
    • Decking for the bays in multilevel shelving construction
    • Accessories

    Optional Fittings

    • Corner protectors
    • Frame protectors
    • Racking side protectors
    • Labels for storage locations and racking aisles
    • Lateral guides for three-way forklifts
    • Mesh or sheet metal wall panels for the shelving
    • Backstops behind the pallets
    • Panels from metal grating (decking)
    • Particle board panels (decking)
    • Sheet metal panels (decking)
    • Sheet metal for load distribution
    Vizualizace policového regálu
  • Standard Dimensions and Load capacity

    Load capacity (kg)

    Depth rack (mm) 300 400 500 600 800
    Width rack (mm)
    600 250 230 220 190 120
    800 220 200 190 160 100
    1000 180 160 150 130 90
    1200 140 120 110 100 80
    1300 130 110 100 90 40
    1500 90 70 60 50
    Reinforcing individual shelves using available stiffeners can increase their load capacity. We will gladly explain the capacities of reinforced shelves upon request.
  • Accessories
    Shelving Support Beams

    Shelving Support Beams

    These are made from cold-formed steel sheeting. They are equipped with brackets on both ends that fit into the perforated frame holes. The section size and the support beam shape differ according to the required load capacity and length. The support beam shape allows the bay to be supplemented with shelves of particle board or sheet metal panels.
    Flow Pallet Racking

    Flow Pallet Racking

    This system is used to store individual items for crates, boxes, and containers of various sizes. It is possible to divide the roller tier into individual lanes with partition strips; it is also possible to adjust both the roller tracks as well as the partition strips. The rollers are made from highly resistant plastic and are fitted with a metal shaft.
    Partitions and Dividers

    Partitions and Dividers

    These are primarily used for separating individual types of materials or goods and for creating individually organized sections on longer shelving units.
    Surface Finish

    Surface Finish

    The standard finish is either galvanization or a paint powder coat. The basic colors are RAL 5010 blue and RAL 7035 gray. It is also possible to supply the shelving in other RAL colors.
    Frames for Discs and Tires

    Frames for Discs and Tires

    These are used to store discs or pneumatic tires. They are manufactured from welded hollow structural section. They are vertically adjustable and are attached to the shelving frame using specially shaped hooks.
    Mesh and Screens

    Mesh and Screens

    These are attached to the shelving frame.

    It is possible to supply a whole range of accessories according to how the shelving will actually be used:

    • Shelves from grating in combination with spill trays for storing chemicals or mineral oils
    • Partitions for separating individual shelves
    • Special support beams for storing clothing on hangers
    • Storage shelving for small-scale material
    • Pole brackets for hanging ladders
    • Side and back wall panels.
  • Downloads