Multilevel Shelving Unit Construction

Multilevel Shelving Unit Construction with Mezzanine

A multi-level shelf rack design allows effective increases in storage space capacity, while at the same time minimising costs. A system of floor platform can be created from special full or perforated metal panels, or from special wooden board.

High weight-carrying capacity

Mechanical durability



Fast installation

  • A floor of a mezzanine is designed as a separate installation unit. It can be made from floor panels, chipboard or metal floor gratings.

  • It is used for storing small materials or boxes. Board panels are delivered in widths of 100 mm or 200 mm depending on the required load.

  • Chipboard panels are available in different thicknesses depending on the required load. The size of the load-bearing area of the floor grating panels depends on the desired load capacity cell.

  • Floor panels and metal gratings are supplied in a galvanised finish.

  • Any transfer point of a handling unit on the platform is dealt with by either hinged or sliding handrails and gates.

Policové regály PROMAN

Multi-storey gallery

Mobile constructions

EU Compliant

Easy to operate

Variants of shelf racks



In general, shelving unit construction is used for storing various types of goods and materials directly on shelves (smaller items, boxes, plastic containers, files, books, etc.)



By placing the shelving racks on the mobile undercarriage you obtain highly funcional storing and archivate system which effectively uses all given space.


Take advantage of our range of products in the PROMAN e-shop. For example, you can directly configure cantilever type shelves according to load/dimensions. The system will automatically generate a quote for you.  The e-shop also offers a large range of accessories for pallet and shelving racks.


Technical Details

  • Shelving Unit Construction

    Shelving units are essentially designed to be self-supporting structures. The shelving units are prefabricated structures composed of special rolled steel section, support beams, and shelves; they are reinforced with diagonal bracing. The basic shelving design is one upright frame with shelving bays. The shelving unit frame is made from four uprights of the appropriate height that are interconnected by diagonal on depth from front to back. The shelving frame must always retain two shelves, i.e., two storage levels to ensure the stability of the overall construction. It is also possible to equip the shelving unit with any of the accessories provided.

  • Technical Details

    Shelving Unit Construction

    • Shelving Unit Construction
    • Shelving Unit Construction
    • Shelves
    • Decking for the bays in multilevel shelving construction
    • Accessories

    Optional Fittings

    • Corner protectors
    • Frame protectors
    • Racking side protectors
    • Labels for storage locations and racking aisles
    • Lateral guides for three-way forklifts
    • Mesh or sheet metal wall panels for the shelving
    • Backstops behind the pallets
    • Panels from metal grating (decking)
    • Particle board panels (decking)
    • Sheet metal panels (decking)
    • Sheet metal for load distribution
    Vizualizace policového regálu
  • Standard Dimensions and Load capacity

    Load capacity (kg)

    Depth rack (mm) 300 400 500 600 800
    Width rack (mm)
    600 250 230 220 190 120
    800 220 200 190 160 100
    1000 180 160 150 130 90
    1200 140 120 110 100 80
    1300 130 110 100 90 40
    1500 90 70 60 50
    Reinforcing individual shelves using available stiffeners can increase their load capacity. We will gladly explain the capacities of reinforced shelves upon request.
  • Accessories
    Shelving Support Beams

    Shelving Support Beams

    These are made from cold-formed steel sheeting. They are equipped with brackets on both ends that fit into the perforated frame holes. The section size and the support beam shape differ according to the required load capacity and length. The support beam shape allows the bay to be supplemented with shelves of particle board or sheet metal panels.
    Flow Pallet Racking

    Flow Pallet Racking

    This system is used to store individual items for crates, boxes, and containers of various sizes. It is possible to divide the roller tier into individual lanes with partition strips; it is also possible to adjust both the roller tracks as well as the partition strips. The rollers are made from highly resistant plastic and are fitted with a metal shaft.
    Partitions and Dividers

    Partitions and Dividers

    These are primarily used for separating individual types of materials or goods and for creating individually organized sections on longer shelving units.
    Surface Finish

    Surface Finish

    The standard finish is either galvanization or a paint powder coat. The basic colors are RAL 5010 blue and RAL 7035 gray. It is also possible to supply the shelving in other RAL colors.
    Frames for Discs and Tires

    Frames for Discs and Tires

    These are used to store discs or pneumatic tires. They are manufactured from welded hollow structural section. They are vertically adjustable and are attached to the shelving frame using specially shaped hooks.
    Mesh and Screens

    Mesh and Screens

    These are attached to the shelving frame.

    It is possible to supply a whole range of accessories according to how the shelving will actually be used:

    • Shelves from grating in combination with spill trays for storing chemicals or mineral oils
    • Partitions for separating individual shelves
    • Special support beams for storing clothing on hangers
    • Storage shelving for small-scale material
    • Pole brackets for hanging ladders
    • Side and back wall panels.
  • Downloads